Ebsray RC40 Regenerative Turbine Pump_1 Ebsray Regenerative Turbine Pump_2 Ebsray RC40 Regenerative Turbine Pump_3

RC40 Regenerative Turbine Pump

Ebsray® R Series Model RC40 Regenerative Turbine Pumps are single stage pumps designed for handling LPG and other gaseous liquids. The model RC40 offers enhanced performance by increasing flow rates and versatility while reducing overall pumpset costs. The RC40 Regenerative Turbine Pump is suitable for the transfer of a wide variety of liquefied gases, including LPG, Autogas, DME, aerosols, CO2 , industrial refrigerants and anhydrous ammonia.

Ebsray Regenerative Turbine Pumps

Features and Benefits

  • One flange fits NEMA and IEC B5 and B14 motors
  • Close-coupled or long-coupled design
  • Three-ported design (two discharge ports)
  • Simple single-stage design
  • Ductile iron pressure retaining parts (body/cover)
  • Minimum temperature rating of -40°C (-40°F)
  • Shaft: high-tensile alloy steel
  • Unique cartridge design mechanical seal
  • Complies with ATEX, UL51 and AS1596 codes
  • Versatile flange options: NPT, ANSI or DIN
  • Maximum working pressure of 34 bar (492 psi) (note: 27.5 bar (400 psi) in regions where Underwriters Laboratories UL51 applies)
  • Motor speeds up to 3,800 rpm (3,600 rpm in regions where Underwriters Laboratories UL51 applies)

Certifications

  • icon_cert-Ex

Technical Data

Part Material
Body, Cover Ductile Iron - ASTM 536
Impeller Bronze
Shaft Carbon Steel
O-Rings FKM
Coupling Guard Aluminum
Porting
Inlet 1-1/2” NPT, Flanged to suit 1-1/2” ANSI Class 300 and DN40 DIN PN40
Discharge 1” NPT, Flanged to suit 1” ANSI Class 300 and DN25 DIN PN40

Performance Data

Ebsray-RC20-Curves_50-and-60Hz-1
Ebsray-RC20-Curves_50-and-60Hz-1
Performance Data (50 & 60 Hz)
Max. Flows 50 Hz: 165 L/min (44 gpm)
60 Hz: 195 L/min (51 gpm)
Max. Differential Pressure 14 bar (200 psi)
Hydrostatic Test Pressure 70 bar (1,015 psi)

Applications

  • Autogas dispensing up to 4 hoses
  • Transfer and industrial dispensing
  • Cylinder filling
  • Fleet refueling
  • Forklift refueling
  • Direct burner and vaporizer feed
  • Above ground and underground tanks;

Now hear from our customers about what they had to say about Ebsray RC40 Model Regenerative Turbine Pumps:

“We had some previous experience with Ebsray pumps and we knew very well the features of this kind of pump. Ebsray pumps have low maintenance and easy installation.”
– Francesco Quintaluce, Technical Manager, Oil Sistems

“With all other pumps, you have to remove the pump from the platform just to replace the mechanical seal, but the RC40 doesn’t require this because we can replace the mechanical seal with the pump installed directly on the platform, with very little time needed for replacement. This helps the RC40 meet our requirements for high differential pressure, good flow capacity, easy maintenance, easy installation, and also it comes at a good price, which is very important for us.”
– Francesco Quintaluce, Technical Manager, Oil Sistems

“For our filling stations, we want the best equipment and we have specific requirements for that equipment. The Ebsray RC40 Pumps can satisfy us from the aspect of differential pressure and flow rate, so we are very happy with this choice.”
– Salvatore Piccolo, Technical Director, AmeGas S.p.A.